Kerastile G1

Kerastile G1 is a white powder composed of cement, sand of selected granulometry, synthetic resins and special admixtures, according to a formula developed in the MAPEI Research and Development Laboratories.Kerastile G1, mixed with water, becomes an easily workable mortar that can be applied even vertically without slumping and without letting the tiles slip.Kerastile G1 hardens without appreciable shrinkage attaining a good resistance, adhering

Technical Data Type:powder Colour:whiteBulk density (kg/m³):1,300Dry solids content (%):100 EMICODE:EC1 R - very low emission Mixing ratio:100 parts Kerastile G1 with 28-30 parts water by weight Consistency of mix:pasty Density of the mix (kg/m³):1,500 pH of mix:over 12 Pot life:over 4 hours Application temperature:from +5°C to +35*C Open time (acc. EN 1346):> 30 minutes Adjustability time:approx. 45 minutes Wall grouting:after 4-6 hours depending on absorbency Floor grouting:after 24 hoursSet to light foot traffic:24 hours Ready for use:14 days FINAL PERFORMANCE Bonding strength in compliance with EN 1348 (N/mm²): – initial bonding after 28 days: – bonding after heating: – bonding after water immersion: – bonding after freeze/thaw cycles:> 1.3 > 0.8 > 1.0 > 1.0Resistance to damp: excellentResistance to ageing: excellentResistance to solvents and oils: excellentResistance to acids and alkalis: poorTemperature when on use:from -30°C to +90°C.