Mapefloor I 300 SL

Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick. May be coloured with MAPECOLOR PASTE. Complies with standards applied in the foodstuffs sector. ADVANTAGES: Non-slip or smooth finish. High resistance to wear and abrasion Rapid installation Highly attractive finish High solids content Easy to clean and sanitise Resistant to most diluted chemicals

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Colour of mix: neutral. Consistency of mix: fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final hardening time: 7 days. Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg. Storage: 24 months in its original sealed packaging. Application: by roller or flat or notched trowel. Consumption: – 2.0 kg/m² for 2 mm thick self-levelling coatings on substrates primed with PRIMER SN; – 0.9 kg/m² for intermediate layers in 3 mm thick non-slip coatings on substrates primed with PRIMER SN; – 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick non-slip coatings on substrates primed with PRIMER SN. Packaging: 20 kg kits (A+B)..